Hi All,
I am new to BDA filters and GraphEdit. I have run into a wall trying to get IP datacasting using MPE over DVB-S, and therefore would greatly
appreciate any advice/help/info.
Here is what I am trying to do:
Using a proprietary DVB-S PCI card, trying to get Audio/Video and IP data over L-band channels. Everything works fine in Linux. In windows,
I am using GraphEdit and NVIDIA Purevideo decoder for the A/V. I am able to decode and display the audio/video successfully.
However, when I try to receive IP data, sent from a IP Encapsulator over the same channel, I get nothing. Wireshark capture shows 0 packets,
and the associated Microsoft TV/Video Connection status shows the same.
In GraphEdit, I am using BDA MPE Filter and BDA IP Sink for the IP data. (Please see attached figure.) The MPE Filter is connected to
output pin 5 of the MPEG-2 Demux, with appropriate PID mapping.
If anyone can help with advise on what additional steps I need, or where I am going wrong, or even with links to solutions if already existing,
I would greatly appreciate that. Am attaching figures for the filter graph, channel setting in Graphedit, Demux PID mapping, and the IP address
setting for the Microsoft TV/Video Connection.
Thanks in advance.