Hi Guys,
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
Full Version: TwinHan BDA Driver failure
DVB Owners Discussion Forum - dvbowners.com > Technical & Development Forums > BDA Driver Development
Hi
Do you have this problem still. I had the same problem and have fixed it.
Do you have this problem still. I had the same problem and have fixed it.
QUOTE (jonathane @ Dec 16 2004, 04:55 PM)
Hi Guys,
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
I have this problem, have had it every time I re-install MCE2005 somehow in the past it has just fixed itself, but not sure why.
Any ideas
Any ideas
QUOTE (azazle @ Apr 15 2005, 07:47 PM)
Hi
Do you have this problem still. I had the same problem and have fixed it.
Do you have this problem still. I had the same problem and have fixed it.
QUOTE (jonathane @ Dec 16 2004, 04:55 PM)
Hi Guys,
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
Hi
I fixed the problem by using the old ( 1.5 ) spectrum drivers but modifying them to the english frequency. If you still have the problem i can email you the files i used.
The spectrum drivers dont create the error code 10 problem but need modifying for the area of the world you are in. tell me your region and i can send you the modified driver files required.
I emailed twinhan also who advised that some of the eproms on the cards (dvb-t mini ter) are faulty and can present the code ten problem that require a reflash of the eprom. I can send you details on how to do this too if required (its easy to check if you have a card with problems)
I fixed the problem by using the old ( 1.5 ) spectrum drivers but modifying them to the english frequency. If you still have the problem i can email you the files i used.
The spectrum drivers dont create the error code 10 problem but need modifying for the area of the world you are in. tell me your region and i can send you the modified driver files required.
I emailed twinhan also who advised that some of the eproms on the cards (dvb-t mini ter) are faulty and can present the code ten problem that require a reflash of the eprom. I can send you details on how to do this too if required (its easy to check if you have a card with problems)
QUOTE (tronski @ Apr 16 2005, 08:35 PM)
I have this problem, have had it every time I re-install MCE2005 somehow in the past it has just fixed itself, but not sure why.
Any ideas
Any ideas
QUOTE (azazle @ Apr 15 2005, 07:47 PM)
Hi
Do you have this problem still. I had the same problem and have fixed it.
Do you have this problem still. I had the same problem and have fixed it.
QUOTE (jonathane @ Dec 16 2004, 04:55 PM)
Hi Guys,
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
I am new to this forum and have some problems...
1. I installed the TwinHan BDA Driver 1.2.1.2 on a fresh MCE 2005. When I try to install the tunder device I get an error (Code 10) and the device won't start.
2. I also tried the Spectrum driver wich installs without problems but when I try to scan for services with MCE i get nothing.
I live in Sweden an we use 8 MHz. I changed the Spectrum inf file to reflect this. When I install the non-BDA driver and use the supplied software I get all the channels.
My card is the TwinhanDTV Ter-CI
I hope somebody can help med...
Absolutely yes please - can you mail them to uzzell at yahoo dot com please. Also details on how to do the EPROM / Many thanks
Hi there - not sure if you are still monitoring this thread but some help with my system please.
I have installed my VisionplusDTV Mini Ter into my MCE system and am running version 1.2.2.0 of the twinhan driver. All works fine for a few days but then the Twinhan tuner develops a code 10 error. The only way I can then get it to work is by uninstalling, moving to a new PCI slot and the reinstalling the driver. It is really frustrating now.
Any ideas?
system details below;
Mainboard: MSI KT4AV
Processor: Athlon 1800xp
Memory - 767Mb
Graphics; Nvidia Geforce FX5600
Sound: Via AC'97
Modem: Alcatel Speedtouch PCI ADSL
OS: Win MCE2005 - upto date SP / patches
Any ideas????
azazle - if you still have the drivers / eprom update stuff can you send to me at johnhord@eurobell.co.uk
I have installed my VisionplusDTV Mini Ter into my MCE system and am running version 1.2.2.0 of the twinhan driver. All works fine for a few days but then the Twinhan tuner develops a code 10 error. The only way I can then get it to work is by uninstalling, moving to a new PCI slot and the reinstalling the driver. It is really frustrating now.
Any ideas?
system details below;
Mainboard: MSI KT4AV
Processor: Athlon 1800xp
Memory - 767Mb
Graphics; Nvidia Geforce FX5600
Sound: Via AC'97
Modem: Alcatel Speedtouch PCI ADSL
OS: Win MCE2005 - upto date SP / patches
Any ideas????
azazle - if you still have the drivers / eprom update stuff can you send to me at johnhord@eurobell.co.uk
QUOTE (azazle @ Apr 16 2005, 11:49 PM)
The spectrum drivers dont create the error code 10 problem but need modifying for the area of the world you are in. tell me your region and i can send you the modified driver files required.
I emailed twinhan also who advised that some of the eproms on the cards (dvb-t mini ter) are faulty and can present the code ten problem that require a reflash of the eprom. I can send you details on how to do this too if required (its easy to check if you have a card with problems)
I emailed twinhan also who advised that some of the eproms on the cards (dvb-t mini ter) are faulty and can present the code ten problem that require a reflash of the eprom. I can send you details on how to do this too if required (its easy to check if you have a card with problems)
I have same error on my machine. Please, can anybody write here how to do the EEPROM? Or mail it to me me2d09@gmail.com.
Many Thanks
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.