 Broke my multi card setup |
  |
| Guest_Paulp_* |
 Feb 18 2008, 11:32 AM
Post
#1
|
|
Guests  |
I've just had to reinstall xp on my computer as my system hard drive was starting to warn that it is getting disturbingly close to failing. Previously I had a compro t300, a dvico full and two ultraview lites all working in harmony with Webscheduler. Now the two lites are refusing to work together. They are setup in the same PCI slots and I'm sure they are on the same drivers as before (4.0.102.0). If either of the lites are taken out the other works fine with the other two cards (by work I mean WS will record and BDAchannelscan will scan). WS both have all cards in thier card list but can't tune the second lite. The only major diference in the system is there are two Sata disks now instead of one but the system disk is still an IDE drive.
I have the feeling I am missing something obvious but I can't pin it down. |
 |
 
|
|
Feb 19 2008, 11:11 PM
Post
#2
|
|
|
Participant Group: Members Posts: 55 Joined: 9-July 05 From: Sandgate,Brisbane Member No.: 3,191 Card: DVICO FusionHDTV |
QUOTE (Paulp @ Feb 18 2008, 11:32 AM)  I have the feeling I am missing something obvious but I can't pin it down. When you install the drivers did you allow it to install drivers for multi cards ? I had a similar problem and you need to install the drivers as many times as you have cards hope it's that easy. |
|
|
|
| Guest_Paulp_* |
Feb 20 2008, 04:03 PM
Post
#3
|
|
Guests |
QUOTE (dazzermighty @ Feb 20 2008, 12:11 AM) When you install the drivers did you allow it to install drivers for multi cards ? I had a similar problem and you need to install the drivers as many times as you have cards hope it's that easy. I wish it was that easy too  I have tried several versions of the drivers from the earliest ones that I have to the most recent ones but the the ones I have been persisting with are "multicard" ones from 2005 that I was using with no problem before. Initially I installed all the cards together and checked that there were drivers for every card in the device manager. When that did not work I pulled them all out (using dvicos driver uninstaller) and installed one card at a time, still no joy. Short of reformatting and starting again I'm all out of ideas.I've given up and bought a different brand card to add to the others. The second lite has gone into another computer as a backup. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th May 2013 - 03:24 PM |