DNTV Live! 1.1.1 Released, Feedback Here Please Options

[renura]

Hi Guys,

For those interested, this is to let you know that version 1.1.1 of DNTV Live! has now been released.

Existing users may download the update from here

You need not unistall the previous version, simply run setup and re-boot as requested.

A trial version is also available from the above page

This version:

1. Fixed a problem with quick record that didn't terminate these timers correctly when user manually stopped recording before quick record interval had expired.
2. Fixed a minor bug in the auto pid update function that would automatically reselect AC3 audio as default regardless of what the user had chosen previously.
3. Added an option for increased errror correction and prevention. Only enable this if you suffer from signal deterioration from bad reception or hardware / software conflicts. Those with any stutter issues after long live viewing sessions may want to enable this option.

Feedback, as usual, here or directly very much appreciated.

Cheers

Renura

[Guest_cdd_*]

Hello

Good to see the AC3 default problem fixed. I like to use MP2 sound for most programs as I can control the SPDIF out (and all other functions) via the oneHTPC iMon remote instead of having to use also the external amplifier remote for the volume. I am assuming that MP2 SPDIF travels via WAV, thus making it possible to use the HTPC remote. This is not the case for AC3.

I still have a continuing problem when changing channels using presets. When pressing the preset for ABC, I get the ABC Guide instead of the SD ABC Brisbane. I'm assuming that this occurs because the ABC is the only TS in Brisbane where the Guide is the first channel (lowest frequency) and the preset defaults to this. Does a checkbox need to be added to the HDTV editor to indicate an SD channel?

[renura]

Hello

Good to see the AC3 default problem fixed. I like to use MP2 sound for most programs as I can control the SPDIF out (and all other functions) via the oneHTPC iMon remote instead of having to use also the external amplifier remote for the volume. I am assuming that MP2 SPDIF travels via WAV, thus making it possible to use the HTPC remote. This is not the case for AC3.

I still have a continuing problem when changing channels using presets. When pressing the preset for ABC, I get the ABC Guide instead of the SD ABC Brisbane. I'm assuming that this occurs because the ABC is the only TS in Brisbane where the Guide is the first channel (lowest frequency) and the preset defaults to this. Does a checkbox need to be added to the HDTV editor to indicate an SD channel?

Hi cdd, welcome to the forum.

Then details on the presets are in chapter 7 of the manual. If you dond't have more than 10 channel to use (0-9) you don't have to use the prest key, just allocate the numbers to the channel you wnat and when you press that number you shoudl get directly to that channel.

If you want to allocate numbers to more than 10 channels then you can preset using "source" for HDTV and EPG for EPG channels. so for example if you assign the number 7 to channels 7, pressing "source" + "7" gives channels 7HDTV, whereas "7" gives you channel; 7SDTV, etc

You need to indicate whether a channel is HDTV or EPG by ticking the relevant box in the channel editor, if no box is ticked the channel is assumed to be SDTV.

Cheers

Renura

[Guest_aussieboykie_*]

If you want to allocate numbers to more than 10 channels then you can preset using "source" for HDTV and EPG for EPG channels. so for example if you assign the number 7 to channels 7, pressing "source" + "7" gives channels 7HDTV, whereas "7" gives you channel; 7SDTV, etc

You need to indicate whether a channel is HDTV or EPG by ticking the relevant box in the channel editor, if no box is ticked the channel is assumed to be SDTV.

Pardon my ignorance, but which is the SOURCE button on the DVico FusionHDTV remote, and do I press SOURCE then 7 sequentially or press and hold SOURCE and then 7?

Regards, AB

[renura]

Pardon my ignorance, but which is the SOURCE button on the DVico FusionHDTV remote, and do I press SOURCE then 7 sequentially or press and hold SOURCE and then 7?

That is referring to the DNTV Live! remote, for the DVICO is HDTV button. You dodn't have to hold it together, just one after the other.

The information is in the manual and/or on your CD

[Guest_Disorganise_*]

Pardon my ignorance, but which is the SOURCE button on the DVico FusionHDTV remote, and do I press SOURCE then 7 sequentially or press and hold SOURCE and then 7?

That is referring to the DNTV Live! remote, for the DVICO is HDTV button. You dodn't have to hold it together, just one after the other.

The information is in the manual and/or on your CD

Glad it wasn't just me that was confused with that. It's counter-intuitive (in my humble opinion) and not explained well in the manual (which I did read prior to posting by the way).

Renura - you were right about the channnels being off-screen. I could ONLY see the list when forcing 1080i. dragged it bag into the middle now so should be sweet. I had already re-installed DNTVLive, but it must remember the settings??

[renura]

Renura - you were right about the channnels being off-screen. I could ONLY see the list when forcing 1080i. dragged it bag into the middle now so should be sweet. I had already re-installed DNTVLive, but it must remember the settings??

ha-ha Yes it remembers the settings.

[ajhubble]

Does this new version work with the new Beta 3 FusionHDTV drivers? At the moment, my DNTV Live installation (off the CD) can't detect my FusionHDTV card.