IPB

Welcome Guest ( Log In | Register )

124 Pages V   1 2 3 > » 

bear
Posted on: Oct 12 2017, 03:59 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


I guess we should not be surprised to see our older capture devices passing away. Electrolytic capacitors usually die after ten years, sooner if you live in the tropics.

Wow, Six recordings at the same time! I was not aware there was that many shopping channels. wink.gif
  Forum: WebScheduler · Post Preview: #83526 · Replies: 4 · Views: 438

bear
Posted on: Oct 12 2017, 03:48 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


The log file indicates that it tested the twin DVBT device as type 1 (DVB-T) ok.
CODE
2017/10/02 19:51:26.842 - BuildGraph SUCCEEDED in checking this device (1:AF9015 BDA Filter\\?\usb#vid_1b80&pid_e402#5&3985650a&0&3#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{9b365890-165f-11d0-a195-0020afd156e4}) as type(1) ok 2017/10/02 19:51:26.842 -
SUCCEEDED ====================================================================
&
2017/10/02 19:51:30.102 - BuildGraph SUCCEEDED in checking this device (2:AF9015 BDA Filter\\?\usb#vid_1b80&pid_e402#5&3985650a&0&3#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{9b365890-165f-11d0-a195-0020afd156e5}) as type(1) ok 2017/10/02 19:51:30.102 -
SUCCEEDED ====================================================================

So you should have at least the two DVBT devices shown on the devices page after the rescan.



The TechniSat test failed while trying to add/connect the capture device of the BDA driver.
CODE
2017/10/02 19:51:23.347 - BDAHelper : Loading Capture Filter
2017/10/02 19:51:23.347 - BDAHelper : LoadFilter(): DNTV Live! Transport Stream Capture Tuner 1
2017/10/02 19:51:23.378 - BDAHelper : Cannot load capture device and connect tuner

As it worked ok under WinXP, this could be a result of a Win7 permissions issue. Try installing the device driver again under "Run as Admin" if an exe installer or reinstall scheduler again without the
"Run as Admin" to see if the device can tested ok.
  Forum: DNTV · Post Preview: #83525 · Replies: 6 · Views: 362

bear
Posted on: Oct 1 2017, 02:43 AM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Hi gtkp,

Prob 1: This likely so, as all the HD channels from the AU broadcasters have since changed from MPEG2 to H264 video format. The version of DNTVLive you
are likely using is fixed to the Azure H264 Video Decoder that is supplied with the DigitalTV application on the CD supplied with the card.
We are currently looking at using the MS Video decoder to get around the issue.

Prob 2: Not sure why this is occurring, have a look in scheduler's log directory for the device log text file to see the error detail. You may need to
activate DNTVLive with your user key and re-install scheduler pro again to have the card identified.
  Forum: DNTV · Post Preview: #83518 · Replies: 6 · Views: 362

bear
Posted on: Oct 1 2017, 02:16 AM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Hi frednerk33,

The error 0x8007001f is a general failure to start error.

MSDN suggest "May be used to indicate that the device has stopped responding (hung) or a general failure has occurred on the device.
The device may need to be manually reset."

Try a power down of the PC by removing the mains power cable for a few minutes. Some MS Win7 device driver updates can cause other devices to remain
hung-up even after a shut down or reset.

It is also possible that the drivers have been recently updated and my need to be reverted back. Suggest a reload of the device drivers.

Another cause is that the device is reserved by another media application preventing it from running.
  Forum: WebScheduler · Post Preview: #83517 · Replies: 4 · Views: 438

bear
Posted on: Jan 6 2017, 09:51 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


QUOTE (rikster @ Jan 4 2017, 09:39 PM) *
I was a bit sceptical that this card would work with DNTV Scheduler pro, but everything appears to work - apart from actual recording. Any ideas?

The DNTV Scheduler Pro is not currently configured to support that card. If you have a licenced key for DNTV Live, activate the key in DNTV Live, then reinstall Scheduler again.
  Forum: DNTV · Post Preview: #83499 · Replies: 3 · Views: 3,371

bear
Posted on: Feb 7 2016, 08:57 AM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Nate is the software developer, suspect that his server is down, hence no working link.

You could send him a PM to ask for the latest version. The only copy I have is of the previous version 2.0.0.7.
  Forum: DigitalWatch Development · Post Preview: #83416 · Replies: 245 · Views: 201,993

bear
Posted on: Jan 30 2016, 09:33 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


PeterL
QUOTE
This is the first time I have installed it in Windows 10 64bit.


The apps are compiled as 32bit only and will be installed as such by Windows.
Your DTV device drivers will need to be installed as 64bit but this should happen automatically anyway. In my experience the DNTV Quad card drivers work ok for 64bit environments. (at least under Win7)

QUOTE
I had it installed in Windows 8.1 before and just upgraded to Windows 10 without doing a clean install, worked perfectly then.

Similar to my own experience, at least for a month after the upgrade. After that Windows 10 upgrades just killed the whole experience.
Startup apps stop working. I had to set my sound scheme to windows default to stop apps from crashing.
I had to remove MS "Edge" and go back to IE11, re-setting my compatibility settings after each weekly windows update.
I have to unplug the power from the PC for 5min every week to get my DTV devices to work correctly after a windows 10 forced update.
I no longer have permissions on folders I've work with previously and my Graphics card video frame rate has dropped to 15fps.
Apart from that, Windows 10 tells me what I can and cannot do. We get on very well now. :blink:NOT.

QUOTE
A full setup guide is available on the digitalnow website

There is also a how to guide built into Scheduler. Look at the top of the settings page: HOW TO.

http://localhost:8088/settings.html#

If you can provide more info like the scheduler log folder then this may of value. Zip the folder and send to Digital Now support.
  Forum: DNTV · Post Preview: #83408 · Replies: 11 · Views: 4,738

bear
Posted on: Nov 29 2015, 09:24 AM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Working on it. no ETA available sorry.
  Forum: DNTV · Post Preview: #83366 · Replies: 18 · Views: 5,498

bear
Posted on: Nov 28 2015, 08:17 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Hi Peter,

The scheduler program will decide which tuners it will use based on the priority. The page you showed previously is for setting a manual recording schedule.

You should be able to schedule a program you want to record from the EPG page. Click on "Home", click on "Show EPG" click on the program you want to record.
You will then see a green cross below the EPG program list for adding the schedule.
  Forum: DNTV · Post Preview: #83364 · Replies: 3 · Views: 2,645

bear
Posted on: Nov 28 2015, 07:47 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


For Info: To watch the 9HD channel in DNTVLive, you can also use the DNTVLive Audio decoder rather than the AC3Filter audio decoder.
  Forum: DNTV · Post Preview: #83363 · Replies: 18 · Views: 5,498

bear
Posted on: Nov 28 2015, 07:23 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Click "Home", click "Setup", click on "Select Devices" to see if it is in the list "Currently Selected DVB-T Devices" if not then check if in the "Devices Available But Not Selected" list and select it.
If not visible then click on "ReScan Devices" to see if it is recognised. The priority of which tuner is used can be changed using the arrow icons. Have a read of the "HowTo" page if not already read.
  Forum: DNTV · Post Preview: #83361 · Replies: 3 · Views: 2,645

bear
Posted on: Nov 26 2015, 08:44 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Kool, 9HD is using H264/AC3, 7 Racing is using H264/AAC so will take a little longer to implement.
  Forum: DNTV · Post Preview: #83352 · Replies: 18 · Views: 5,498

bear
Posted on: Nov 19 2015, 07:56 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


I don't have audio value in DNTVLive when channel scanning ch78 so it's not going to give any audio. The video is decoded ok using an old AzureWave H264 decoder. CLSID {7F65F370-1A3D-4175-B2EC-EA640421A78F}
The supported only display decoders are for the media format used so the ones your seeing in the list are for mpeg 2 formats.
  Forum: DNTV · Post Preview: #83330 · Replies: 20 · Views: 10,406

bear
Posted on: Nov 14 2015, 09:58 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


You need the Twinhan h264 decoder for video, audio mpg4 audio is not picked up in DNTVLive scan, not sure why.
  Forum: DNTV · Post Preview: #83321 · Replies: 20 · Views: 10,406

bear
Posted on: Nov 14 2015, 08:12 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Have you tried using TSMux and playing with VLC?
  Forum: DNTV · Post Preview: #83319 · Replies: 20 · Views: 10,406

bear
Posted on: Nov 11 2015, 07:38 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


The two apps should be able to work with MPEG4 transmissions but as we have none in Australia to decode yet we will have to wait and see. The only problem I can see will be the H264 video decoders needed and what audio compression format will be used.
  Forum: DNTV · Post Preview: #83309 · Replies: 20 · Views: 10,406

bear
Posted on: Aug 27 2015, 09:11 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


QUOTE
2015/08/16 14:54:34.150 - Changing Frequency 557625 bandwidth 7.


Have you tried the Frequency 557500, The 125kHz offsets should now mostly be removed post Restack.
  Forum: WebScheduler · Post Preview: #83262 · Replies: 8 · Views: 5,365

bear
Posted on: Nov 13 2014, 08:20 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


QUOTE
Peter,
Do you know of any plans to update DNTV Scheduler for VAST


To be fair, your question needs to be asked of DNTV Support. The software is owned by DNTV and it's their call as to what it will support. At a guess they would need to have a VAST/CAM capable device as a product before development and testing could begin.
While the DNTVSchedulerPro software is propriety, it is made available as an add on when bundled with a DNTV supported device or with the DNTVLive software as a package.

Dan,
  Forum: WebScheduler · Post Preview: #81972 · Replies: 6 · Views: 3,674

bear
Posted on: Nov 9 2014, 07:13 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Hi Peter,

Because you posted in the Webscheduler forum, I made the statement based on this software. DNTVSchedulerPro is a product branch that was developed by DNTV to support DVBS devices using Irdeto encrypted satellite transponders previously used in Australia. The product was also designed and tested to take advantage of the Multi CAM units available at that time. Please note that it has not yet been updated to support VAST Satellite devices.

Dan.
  Forum: WebScheduler · Post Preview: #81947 · Replies: 6 · Views: 3,674

bear
Posted on: Oct 22 2014, 10:28 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Have you tried re-installing scheduler again?
  Forum: DNTV · Post Preview: #81818 · Replies: 2 · Views: 2,162

bear
Posted on: Oct 22 2014, 10:26 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Can you try updating DNTVLive with a licence key and then reinstall dntv scheduler again.
  Forum: DNTV · Post Preview: #81817 · Replies: 1 · Views: 2,049

bear
Posted on: Oct 22 2014, 10:18 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


If you use iexplorer zoom level control you can change the number of channels in view. Just be sure to refresh the web page to get the epg page to update with the new size.

BTW, you can also move the mouse cursor over a channel name and use the scroll wheel to move the channels up or down in the display area. You can also move the mouse cursor into the programs area and scroll the programs forward or backwards, left and right inside the display.
If you don't have a scroll wheel then you can click and drag the mouse to move the display content.
  Forum: DNTV · Post Preview: #81816 · Replies: 2 · Views: 1,863

bear
Posted on: Oct 22 2014, 09:58 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


The decryption occurs in the CAM (module) where it is fed the transport stream and it decrypts the required packets, then passes the modified stream onto the capture device. If the CAM is multi channel then you can decrypt multiple programs in the stream, if not then you can only decrypt one program at a time. The software sets up the required packet id's to be decoded. Hence why you can only record the non-encrypted programs like ABC & the help channels with scheduler as it does not support CAMs.
  Forum: WebScheduler · Post Preview: #81815 · Replies: 6 · Views: 3,674

bear
Posted on: Jul 31 2014, 06:54 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Have you selected the device type as DVB-T? The attachment shows that it not selected.
  Forum: DNTV · Post Preview: #81609 · Replies: 2 · Views: 1,603

bear
Posted on: May 18 2014, 04:59 PM


Forum Regular


Group: Members
Posts: 3,099
Joined: 24-April 04
From: Queensland
Member No.: 808


Are you connecting the matching tuner to capture filter?
Have you tried submiting a tune request on the Network Provider before connecting the tuner/capture filters?
  Forum: BDA Driver Development · Post Preview: #81449 · Replies: 2 · Views: 1,973

124 Pages V   1 2 3 > » 

New Posts  New Replies
No New Posts  No New Replies
Hot topic  Hot Topic (New)
No new  Hot Topic (No New)
Poll  Poll (New)
No new votes  Poll (No New)
Closed  Locked Topic
Moved  Moved Topic
 

RSS Lo-Fi Version Time is now: 17th July 2018 - 03:37 PM