Can't Get Dw Running., Please help me! Options

[Guest_Burbruee_*]

Hello, I've been searching and looking for help in this forum all night but couldn't find anything.
So I figured I ask you guys for some assistance.

I've got a Twinhan DVB-T tuner and I've installed the latest BDA-drivers in order to get WebScheduler running.

Now I want to be able to use DigitalWatch.
I got the latest 726 version here on the forums.
I've got a channels.ini file set up.
When I start DW I get the following error:

Error: Can't connect Audio pin on MPEG-2 Demultiplexer to XForm In Pin on Intervideo Audio Decoder"

I'm using Intervideo both in Video and AudioDecoders.ini, and I have tried just about all alternate codecs in those files.

I don't get an error on Intervideo video decoder, however, there is still no picture.
I recently also tried to install DWSP1 codec, but no success.

[convas]

Hi,
Give DW2 a go, I could not manage to get DW 726 working with my Twinhan card either, I cannot remember the exact error but it was similar to what you are get, DW2 worked straight up on my system.

CV

[nate]

Try running the pin enum tool i wrote to see if the pin names are right.
see this post

I think the clsid for the intervideo audio decoder is {7E2E0DC1-31FD-11D2-9C21-00104B3801F6} but you should check your AudioDecoders.ini file to make sure.

[Guest_Burbruee_*]

Hi,
Give DW2 a go, I could not manage to get DW 726 working with my Twinhan card either, I cannot remember the exact error but it was similar to what you are get, DW2 worked straight up on my system.

CV

DW2 doesn't produce any errors, but there is no vid or audio either.
Channelscan works ok, but there's just a black screen.

[nate]

DW2 doesn't produce any errors, but there is no vid or audio either.
Channelscan works ok, but there's just a black screen.

Check DigitalWatch.log

[Guest_Burbruee_*]

DW2 doesn't produce any errors, but there is no vid or audio either.
Channelscan works ok, but there's just a black screen.

Check DigitalWatch.log

CODE

---------------------
DigitalWatch starting
Build - v2, 0, 1, 3
Restoring last window position. x=144 y=113 width=1024 height=576
Initialising DirectDraw
  Enumerating Primary DirectDraw devices
    Found device: 0 "display" "Primär bildskärmsdrivrutin"
  Enumerating Attached DirectDraw devices
    Found device: 0 "display" "Primär bildskärmsdrivrutin"
    Found device: 65537 "\\.\DISPLAY1" "Tul Corporation, RADEON 9200SE"
  Enumerating Detached DirectDraw devices
    Found device: 0 "display" "Primär bildskärmsdrivrutin"
  Enumerating DirectDraw devices
    Found device: 0 "display" "Primär bildskärmsdrivrutin"
    Found device: 65537 "\\.\DISPLAY1" "Tul Corporation, RADEON 9200SE"
  Creating DirectDraw screens
    Creating DirectDrawScreen: 65537 "\\.\DISPLAY1" "Tul Corporation, RADEON 9200SE"      monitor(0, 0, 1280, 1024)
Loading OSD file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\OSD.xml
  Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\OSD.xml
  Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\OSD.xml
Initialising TVControl
  Loading Keys file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Keys.xml
    Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Keys.xml
    Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Keys.xml
    Loading Keys from XML
    Finished loading keys from XML
  Finished loading keys file
  Initialising DWGraph
    Loading Decoders file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Decoders.xml
      Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Decoders.xml
      Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\Decoders.xml
    Loading Media Types file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\MediaTypes.xml
      Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\MediaTypes.xml
      Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\MediaTypes.xml
  Finished Initialising DWGraph
  Added Source - BDA
  Starting command processing thread
Finished Initialising TVControl
Queue Command 'Key(13, 0, 0, 0)'
TVControl Execute 'Key(13, 0, 0, 0)'
  TVControl::ExecuteGlobalCommand - Key(13, 0, 0, 0)
    TVControl::Key -     RETUR (13)
      TVControl Execute 'Select()'
        TVControl::ExecuteGlobalCommand - Select()
        DWOnScreenDisplay::ExecuteCommand - Select()
          TVControl Execute '                ExitMenu(-1)                SetSource(BDA)            '
            TVControl::ExecuteGlobalCommand - ExitMenu(-1)
            TVControl::ExecuteGlobalCommand - SetSource(BDA)
              Initialising BDA Source
                Loading DVBT Channels file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Channels.xml
                  Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Channels.xml
                  Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Channels.xml
                Finished Loading DVBT Channels file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Channels.xml
                Loading DVBT Frequency List file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\FrequencyList.xml
                  Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\FrequencyList.xml
                  Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\FrequencyList.xml
                Finished Loading Frequency List file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\FrequencyList.xml
                Loading BDA DVB-T Cards file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Cards.xml
                  Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Cards.xml
                  Finished Loading XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Cards.xml
                  Card - Active
                    DTV-DVBT 878 Digital Tuner Filter
                      @device:pnp:\\?\pci#ven_109e&dev_036e&subsys_00011822&rev_11#4&3b1d9ab8&0&5040#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{e5644cc4-17a1-4eed-bd90-74fda1d65423}
                    DTV-DVBT 878 Digital Capture Filter
                      @device:pnp:\\?\pci#ven_109e&dev_0878&subsys_00011822&rev_11#4&3b1d9ab8&0&5140#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5297613a-d97d-47f4-af3c-af825d846701}
                Finished Loading BDA DVB-T Cards file
                Checking for new BDA DVB-T Cards
                Finished Checking for new BDA DVB-T Cards
                Saving XML file: F:\Documents and Settings\Administratör.BOOL\Mina dokument\DW-2.0.1.3\BDA_DVB-T\Cards.xml
                There are no active BDA cards
          Finished Execute : -2147467259
      Finished Execute : 0
Finished Execute : 0
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
could not set IVideoWindow position: -2147467262
Queue Command 'Key(-3, 0, 0, 0)'
TVControl Execute 'Key(-3, 0, 0, 0)'
  TVControl::ExecuteGlobalCommand - Key(-3, 0, 0, 0)
    TVControl::Mouse -     Right Click
  DWOnScreenDisplay::ExecuteCommand - Key(-3, 0, 0, 0)
  Function 'Key(-3, 0, 0, 0)' called but has no implementation.
Finished Execute : 1
Destroying BDA Source
  Stopping DW Graph
  Finished Stopping DW Graph
  Unloading Tuner
  Finished Unloading Tuner
  Cleaning up DW Graph
  Finished Cleaning up DW Graph
Finished Destroying BDA Source
Destroying BDA Source
Finished Destroying BDA Source

[nate]

Are you sure the drivers still installed correctly? It's not detecting any BDA tuner devices, although at one time it must have since there's an entry in the cards.xml file.

[Guest_Burbruee_*]

Are you sure the drivers still installed correctly? It's not detecting any BDA tuner devices, although at one time it must have since there's an entry in the cards.xml file.

Well it does work with both WebScheduler and Showshifter, and those need BDA-drivers in order to detect the tuner.

[nate]

You could delete your cards.xml file and try again, but aside from that i'm at a loss.

[Guest_Troy_*]

Same thing happening to me. Scans channels fine, works with WebScheduler and other DVB app that came with it (Compro) but DigitalWatch is just black screen. Tried deleting cards.xml and regenerated it fine here's the cards.xml file:
======================================
<Card active="1" detected="1">
<Tuner device="@device:pnp:\\?\pci#ven_1131&dev_7134&subsys_c900185b&rev_01#4&1351887d&0&48f0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{3ff44ee5-8547-402a-94f3-d447f4d7c400}" name="VideoMate BDA DVBT Tuner" />
<Capture device="@device:pnp:\\?\pci#ven_1131&dev_7134&subsys_c900185b&rev_01#4&1351887d&0&48f0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5bb3dbd0-9e1e-424c-9281-6b5e7109f100}" name="VideoMate BDA Digital Capture" />
</Card>
======================================
as you can see it detected it fine.

Any ideas?
Did you get yours working?

[nate]

Troy. Post your DigitalWatch.log file so we can see what's going on. My guess is you don't have the video decoder setup right.