IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> DNTV Scheduler Pro
rikster
post Jan 4 2017, 09:39 PM
Post #1


Participant


Group: New Members
Posts: 70
Joined: 8-September 09
From: Sydney
Member No.: 12,523
Card: DNTV Quad


I've just received my Vista View card from DNTV Live. I have set this up with DNTV Live & DNTV Scheduler pro. Scheduler pro was able to scan for all of the channels & grabbed the EPG for each when it did.
However, when I attempted a recording, I get the following error:

CODE
2017/01/04 22:26:58.280 - Process 5352 : Parent : 8320
2017/01/04 22:26:58.280 - Config(device_id:1)
2017/01/04 22:26:58.280 - Config(device_name:7164 BDA DVBT Tuner\\?\pci#ven_1131&dev_7164&subsys_e0081a92&rev_81#4&12302a32&0&00e9#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{3ff44ee5-8547-402a-94f3-d447f4d7c401})
2017/01/04 22:26:58.280 - Config(device_type:1)
2017/01/04 22:26:58.280 - Config(ci_type:0)
2017/01/04 22:26:58.280 - Config(ci_name:None)
2017/01/04 22:26:58.280 - Config(frequency:226500)
2017/01/04 22:26:58.280 - Config(bandwidth:7)
2017/01/04 22:26:58.280 - Config(capture_type:98)
2017/01/04 22:26:58.280 - Config(multi:1)
2017/01/04 22:26:58.280 - Config(share:1)
2017/01/04 22:26:58.280 - Config(epgscan_path:data\xmlepg\)
2017/01/04 22:26:58.280 - Config(share_path:capture\)
2017/01/04 22:26:58.280 - Config(file01:545,0,0,256,512,650,1,98,0>capture\EPG Scan - ABC.ts)
2017/01/04 22:26:58.281 - Config(start)
2017/01/04 22:26:58.288 - Detection : No Supported DTV Cards could be found.
2017/01/04 22:26:58.289 - Building capture graph failed with 0x80004003


I was a bit sceptical that this card would work with DNTV Scheduler pro, but everything appears to work - apart from actual recording. Any ideas?
Go to the top of the page
 
+Quote Post
therat
post Jan 5 2017, 12:33 PM
Post #2


Forum Regular


Group: Members
Posts: 1,024
Joined: 3-July 05
From: Brisbane
Member No.: 3,165
Card: DNTV Quad


The problem is the second last line you posted. No supported DTV cards found. You need a DigitalNow card/USB tuner on your system before the Vista View will work.

No way around that unfortunately.

Do you have an old working DN card (Quad, hybrid, 7164 or TinyTwin, Dabby)? Just install it with drivers. Even if you don't use it, as long as it is there should do the trick and get the Vista View working
Go to the top of the page
 
+Quote Post
bear
post Jan 6 2017, 09:51 PM
Post #3


Forum Regular


Group: Members
Posts: 3,095
Joined: 24-April 04
From: Queensland
Member No.: 808
Card: VisionPlus DVB-t


QUOTE (rikster @ Jan 4 2017, 09:39 PM) *
I was a bit sceptical that this card would work with DNTV Scheduler pro, but everything appears to work - apart from actual recording. Any ideas?

The DNTV Scheduler Pro is not currently configured to support that card. If you have a licenced key for DNTV Live, activate the key in DNTV Live, then reinstall Scheduler again.
Go to the top of the page
 
+Quote Post
rikster
post Jan 6 2017, 10:17 PM
Post #4


Participant


Group: New Members
Posts: 70
Joined: 8-September 09
From: Sydney
Member No.: 12,523
Card: DNTV Quad


Thanks guys. I have reinstalled my quad (which is functional - but not for recording). Now I can use the Vista View card!

Looks like I have almost cracked all of my issues now. Finally, I have a windows 10 64 bit machine running & recording with DNTV scheduler pro. Could not have done it without this forum!
Thanks again.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 28th April 2017 - 04:41 AM