IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> twtinytwin BDA driver conflict ?
Jeltz
post May 14 2008, 12:12 PM
Post #1


Participant


Group: Members
Posts: 73
Joined: 15-July 03
Member No.: 64



FYI
Anyone seen a code 38 device problem?

TinyTwin BDA driver Version = 7.7.4.1 Vista Signed (last updated 4/4/08)

Please note that this driver seems to cause a conflict with my pioneer optical drive under vista sp1.

If you unplug the optical drive and plug it back in, you get the following device error
“Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)” on the optical drive.

If you uninstall the tinytwin drivers, the problem goes away. Reinstall the tinytwin drivers and the problem comes back.....
Note the system all works fine on cold boot. It only happens after unplug and replug of optical drive, including if you use safely remove hardware first.

Further info:

PIONEER DVD-RW DVR-106D USB Device USBSTOR\CDROM&VEN_PIONEER&PROD_DVD-RW__DVR-106D&REV_1.06\CJDL009108WL&0 38

The tinytwin seems to reside at
USB\VID_13D3&PID_3226&MI_00\6&35F59775&1&0000

Regards, Jeltz
Go to the top of the page
 
+Quote Post
renura
post May 14 2008, 02:56 PM
Post #2


Enthusiast


Group: Members
Posts: 6,668
Joined: 10-July 03
From: Canberra
Member No.: 38
Card: None


I have never seen it, but I don't have that drive anyway.
Does it happen with the other drivers?
Does it happen with other systems?
Have you asked Pioneer about it?

This post has been edited by renura: May 14 2008, 02:58 PM


--------------------
Renura Enterprises Pty Ltd - Owner of DigitalNow and MediaNow- Importers, Distributors and Retailers of Digital TV and other Digital Multimedia Solutions
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 19th June 2019 - 12:55 AM