DVBWorld Devices, DVBWorld USB Device support MAC OSX Rating Options

[dvbworld]

1.the MMInput2102 is a driver of USB2102 DVB -s device on Mac OS X 10.4.x or above.
2.It supports iTele.
3.load the driver by the following steps:
a.open a terminal.
b.copy the driver to /tmp.
sudo cp -R MMInput2102.kext /tmp

c.load the driver by the flowing command:
cd /tmp
sudo kextload -t MMInput2102.kext
d.plus in the device.
e.test it by iTele.

DVBWorld CA+CI USB BOX



If User purchased a CA reader , the CA Cardreader is magical CA reader ,it can read original smart card, like Irdeto ,Viaccess, Conax ,Nagravison,Seca…



DVBWorld DVB-S2102

USB 2102 Support MAC OSX driver

DVBWorld HD DVB-S2 2104 USB Box

http://www.worlddvb.com

Attached File(s)

 MAC_OSX.jpg ( 122.85K ) Number of downloads: 14

 

[Guest_fununcle_*]

I m testing....

1. driver (kext) is placed only in the hand, debug (temporary) mode with key -t and after to each reloading necessarily it again connected!
2. setup LNB C band only, (need Ku band too) and the absences of diseqs did not gladden, and and switching power.
3.The import of the frequencies and other parameters is possible only with the presence of the Internet, and it is realized in the form drag-n-drop, to the window of program, the reference of necessary satellite from Lyngsat. Conveniently certainly and entire such... in the Mac style "think Different"))) but hand input need necessary!

Attached File(s)

 screen_sattv.jpg ( 143.06K ) Number of downloads: 5

 

[dvbworld]

I m testing....

1. driver (kext) is placed only in the hand, debug (temporary) mode with key -t and after to each reloading necessarily it again connected!
2. setup LNB C band only, (need Ku band too) and the absences of diseqs did not gladden, and and switching power.
3.The import of the frequencies and other parameters is possible only with the presence of the Internet, and it is realized in the form drag-n-drop, to the window of program, the reference of necessary satellite from Lyngsat. Conveniently certainly and entire such... in the Mac style "think Different"))) but hand input need necessary!

This demo driver is only for iTele which is a free software basing on GPL,
and not perfect on DVB-S platform.Currently only simple LNB settings are
supported, full DiSEqC networks will be coming later on the high version.
Tks for your testing.

[Guest_fununcle_*]

Tks for your testing.

welcome))
await the complete working relise!

[Spacevidcast]

I'm attempting to install the drivers. When I download and unpack the RAR there is no file called MMInput2102.kext in the directory, so I can't copy it over to the temp directory. There is a file called MMInput2102 but if I add the .kext extension and try to run it I get the error "kextload: /private/tmp/MMInput2102.kext is not a directory
can't add kernel extension MMInput2102.kext (not a directory) (run kextload on this kext with -t for diagnostic output)"

Anyone have any ideas?

Thanks,

Benjamin Higginbotham
Spacevidcast
benjamin@spacevidcast.com