ARGGG..... No TV Signal and Vista MCE, Fusion DVBT-PRO and no signal in MCE Vista Rating Options

[Guest_Rick_78_*]

THIS IS DRIVING ME NUTSSSSSSSSSSS... HELP SOMEONE PLEASEEEEEEEEEE

I have recently installed Vista Ultimate, The FusionHDTV application works in Vista perfectly the latest version 3.62.01. But I would like to use Media Centre instead. Configuring Media centre does detect the tuner card and if i do a scan of channels it picks up all the digital channels. When I go to Live TV a message appears There is currently no tv signal detected for this channel. The channel may be temporarily off-the-air, or you may need to adjust or reconnect your antenna. I have a FusionHDTV DVBT-Pro. I have email Dvico support and there arent much help. I have rebuilt my PC 4 times now and the same problems appears. The same message also appears in device manger Dvico have advised to check my drivers etc, but they seem fine in device manager and they are exactly what dvico recommend. The error message in event viewer relating to MCE says,

The description for Event ID 4 from source ehRecvr cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

FusionHDTV, NTSC/ATSC WDM TvTuner
80070057

the message resource is present but the message is not found in the string/message table


Please help me I have no hair left.

[Guest_Jamnsk_*]

Well it has taken a good 24 hours for me to resolve the same problem. When I installed my dvico fusionhdtvdual digital 4 into my htpc the bluebird usb tuner part of the card was recognised and installed with the 3.62 drivers from the net ok but I had no tv signal despite being able to find channels under MCE Vista. The other strange thing was that VIsta kept discovering an 'unknown device' that was directly related to the car. When I pulled the card the message went away. So after much trying I finally was able to instal the drivers for this unknown device by directing Vista to search my hard drive and after quite a few attempts all of the 6 'unknown devices' installed correctly. It turns out that these are the USB hubs and ports that the card uses to do its thing. Despite the card being in PCI format I think it must just be a bunch of USB thingys stuck onto a PCI board. Now that all of these devices have been found it seems to work fine. Channel changes are a abit slow but at the moment just having a picture and sound are a bonus. Hope this helps.

Cheers

[Guest_beruska_*]

I have a DVICO FUSIONHDTV DVB-T Pro tuner in my PC running Vista Home Premium.
Vista Media Centre works perfectly to view the digital channels and so does the Fusion remote using
the DVICO drivers.
I have two problems though.

Can i view Analog TV in Vista Media Centre using this card as not all our channels are Digital yet and if so how do i do it as when i scan the channels it does not give me any options for Analog?

My second problem is that the Fusion HDTV program 3.62.01 does not work that well in my pc. Sometimes i can only scan and save Analog channels and sometimes only the Digital ones plus the program freezes my computer alot and i have to reset.
Sometimes it scans all the channels but won't save any.
It seems very unstable. Does any one have the same problem ?

I have been in contact with DVICO most days for the last week and have tried their different suggestions on how to fix it but all to no avail.
DVICO have finally told me that there is a problem with the channel list in the Fusion HDTV program as per below

"Hi.
We're changing the channel list now.
Please be patient and we will update it when we have improved for this.
I think I can send you a new test file next week.
Thanks."

I hope this will fix the all the problems with the Fusion HDTV program on my pc (especially the freezing and resetting part).
If anyone can help me view analog in Vista Media Centre it would be much appreciated.
When i brought the card the computer shop assured me that i could but when i have asked them how they have no idea.

Cheers

[Guest_cjsok_*]

Rick,
Have you be able to resolve this issue yet?
I have the exact same problem,
I can scan and find all the channels, but I get the 'No TV Signal' when I try to watch the channels



Regards
CJ